Fabricating Trust

Established 1989

company-image

About PEB

PEB stands for Pre Engineered Buildings. It can fulfill a wide range of structural and aesthetic design requirements. This flexibility allows PEBs to fulfill a vast range of building configurations, custom designs, requirements and applications. The technology offers several advantages over conventional concrete or steel structures, both in terms of cost and time savings.

PEB Manufacturing Process

PEBs are primarily made up of Built-up “I” shaped primary structural framing members (columns & rafters), Cold-formed “Z” & “C” shaped secondary structural members (roof purlin, eave struts & wall girts), & Roll formed profiled sheeting (roof & wall panels). Other features include mezzanine floors, crane runway beams, roof platforms, catwalks, fascias, parapets, canopies & roof extensions.

Flowchart

About LGS

LGS stands for Light Gauge Steel. This technology uses lightweight steel frames and is new in India. It offers several advantages such as speedy construction and erection, cost savings, etc. The steel skeleton for a small house can be produced in the factory and erected on site all within a short time frame of 1-2 weeks. The structure is then cladded on both sides by metal sheets or Magnesium/Gypsum boards and insulation depending on usage. The resulting structure is weather and earthquake resistant. Applications include partition walls, low-cost housing, security cabins, small sheds and more.

LGS Manufacturing Process

Light gauge steel construction is very similar to wood framed construction in principle - the wooden framing members are replaced with thin steel sections. The steel sections used are cold formed sections (formed or given shape at room temperature). This is in contrast to thicker hot rolled sections, that are shaped while the steel is molten hot. Cold formed steel is shaped by guiding thin sheets of steel through a series of rollers, each roller changing the shape very slightly, with the net result of converting a flat sheet of steel into a C or S-shaped section.

Flowchart

Downloads